2.5" SSD Drive

SS210-25

2.5" SSD Drive

SS210-25

  • Built-in Hardware ECC
  • Global Wear Leveling
  • Flash Bad-block Management
  • S.M.A.R.T.
  • Power Failure Management
  • ATA Secure Erase
  • TRIM
  • Supports CoreAnalyzer
  • Mechanical design available in both 9.5mm & 7mm height

Introduction

Apacer SS210-25 is designed for the high levels of performance and reliability. With adoption of SATA 3.0 transmission interface, SS210-25 offers storage capacities from 8GB to 240GB with excellent IOPS. The drive comes with various implementations including Apacer CoreSecurity, global wear leveling, flash block management, S.M.A.R.T., TRIM, and extended temperature support. It is suitable for Embedded, POS, KIOSK and IPC applications to optimize its operating conditions featuring in high-speed, stability and power savings.

Spec
  • Model
    SS210-25
  • Interface
    SATA 3.2 (6Gb/s)
  • Connector
    (7+15) pin male
  • Form Factor
    2.5”
  • NAND Flash Type
    SLC
  • Capacity
    8GB~240GB
  • External DRAM
    Yes
  • Sequential Read Performance (MB/sec)
    Up to 530
  • Sequential Write Performance (MB/sec)
    Up to 445
  • ECC Engine
    Built-in 40-bit per 1K bytes BCH ECC
  • IOPS (4K Random Write)
    76K
  • Standard Operating Temperature (°C )
    0 ~ + 70
  • Extended Operating Temperature(°C )
    -40 ~ + 85
  • Storage Temperature(°C )
    -40 ~ + 100
  • Shock
    Operation: Acceleration, 50(G)/11(ms)/half sine
    Non-operation: Acceleration,1500(G)/0.5(ms)
  • Vibration
    Operation: 7.69 Grms, 20~2000 Hz/random
    (compliant with MIL-STD-810G)
    Non-operation: 4.02 Grms, 15~2000 Hz/random
    (compliant with MIL-STD-810G)
  • Operating Voltage
    5.0 V ± 5%
  • Power Consumption
    Active mode: 500 mA; Idle mode: 95 mA
  • Dimension (L x W x H )
    7mm: 100.00 x 69.85 x 6.90 mm
    9.5mm: 100.00 x 69.85 x 9.30 mm
  • MTBF (hours)
    >2,000,000

Contact Us

If you have questions that our website hasn't answered, please get in touch with us.

Where to Buy Contact Us