CM710-CF

Global Wear Leveling
Built-in BCH ECC capable of correcting up to 96 bits in 1KB data
Supports S.M.A.R.T commands
Flash Block Management
Power Failure Management

Introduction

Apacer industrial CM710-CF card is compliant with the CF 6.1 standard compatible specifications.
Apacer adopts the standard 50-pin connector and MLC chip with higher capacity for the card. It is available in capacities from 8GB to 128GB. The data transfer mode is up to PIO Mode 6, Multiword DMA Mode 4, Ultra DMA Mode 6, with the sequential read/write speed reaching as fast as 95/55 MB/sec.
To help data stay correct, this CM710-CF memory card also supports 96-bit ECC function, wear-leveling function,S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) and supply voltage power-down detection for full power-down robustness,thereby substantially enhancing product reliability.

Spec

Model

CM710-CF
Interface

PC Card Memory Mode; PC Card I/O Mode; True IDE Mode
Connector

50-pin female
Transfer Mode

PIO Mode 6, Multiword DMA Mode 4, Ultra DMA Mode 6
NAND Flash Type

MLC
Capacity

8GB~128GB
External DRAM

No
Sequential Read Performance (MB/sec)

Up to 95
Sequential Write Performance (MB/sec)

Up to 55
ECC Engine

Built-in 96-bit per 1K bytes BCH ECC
Standard Operating Temperature (°C )

0 ~ + 70
Extended Operating Temperature(°C )

-40 ~ +85
Storage Temperature(°C )

-40 ~ +100
H/W Write Protect

No
Thermal Sensor

No
Shock

Operation: 50G, 11ms
Non-operation: 1500G, 0.5ms
Vibration

Operation: 7.69 Grms, 20~2000 Hz/random
(compliant with MIL-STD-810G)
Non-operation: 4.02 Grms, 15 ~ 2000 Hz/random
Operating Voltage

3.3 V / 5.0 V ± 5%
Power Consumption

Operating Voltage: 3.3V
– Active mode: 165 mA
– Standby mode: 10 mA

Operating Voltage: 5.0V
– Active mode: 170 mA
– Standby mode: 10 mA
Dimension (L x W x H )

36.40 x 42.80 x 3.30 mm
MTBF (hours)

>3,000,000