Enterprise Series

PV93E-M2110

Enterprise Series

PV93E-M2110

  • Low-Density Parity-Check (LDPC) Code
  • Global Wear Leveling
  • Flash Bad-block Management
  • Flash Translation Layer: Page Mapping
  • DataDefender™
  • S.M.A.R.T. Function
  • TRIM
  • Hyper Cache Technology
  • Over-Provisioning
  • SMART Read Refresh™
  • Signed Firmware
  • CorePower
  • Thermal Sensor
  • Thermal Throttling
  • End-to-End Data Protection
  • Sidefill Technology
  • Heatsink Design

High-Speed Efficiency. Enterprise-Proven Reliability — Explore the PV93E-M2110

 

Apacer PV93E-M2110 is a high-throughput, long-life NVMe SSD designed in the M.2 form factor for space-constrained enterprise and edge platforms. Featuring 112-layer 3D TLC NAND Flash and full compliance with PCIe Gen4 x4 and NVMe 1.4, it delivers substantially higher bandwidth and lower latency than SATA storage, while achieving improved power efficiency. This balance of speed and efficiency makes PV93E-M2110 well suited for read-heavy and mixed workload environments.

 

Capable of up to 7,335 MB/s sequential read and 6,475 MB/s sequential write, PV93E-M2110 maintains stable, predictable performance with finely tuned QoS behavior. Designed for continuous operation, it supports more than 1 DWPD over a 5-year service life, ensuring sustained output and long-term dependability in demanding deployments.

 

Optimize system performance with Apacer PV93E-M2110 — a PCIe Gen4 NVMe solution tailored for high-density, power-conscious designs.

  • Power Loss Protection: Using tantalum polymer capacitors secures in-flight data and preserves transmission stability during sudden power events.
  • Multi-Layer Reliability Design: Coordinated hardware and firmware mechanisms provide consistent behavior under heavy and prolonged workloads.
  • Graphene-Based Heat Dissipation: Efficiently disperses heat, enabling the SSD to operate at full speed without thermal constraints.
  • Sustained Write Endurance: Engineered for applications that demand continuous access and long operational lifespan.

Advanced flash control and structural reinforcement technologies further enhance reliability and efficiency.

  • LDPC ECC & On-Module ECC: Enhances error-correction capability, extending SSD endurance and ensuring high data accuracy.
  • Sidefill Technology: Improves resistance to vibration, thermal stress, and mechanical shock for stable operation in demanding environments.
  • Energy-Aware Architecture: Reducing total system power consumption compared to legacy storage devices.

 

By integrating high-bandwidth PCIe Gen4 architecture, power-failure safeguards, advanced thermal dispersion, and enterprise-grade durability, Apacer PV93E-M2110 is designed for servers, edge nodes, and embedded platforms where compact form factor, efficiency, and long-term reliability are essential.

Spec
  • Model
    PV93E-M2110
  • Interface
    PCIe Gen4 x4
  • Connector
    M.2 M Key
  • Form Factor
    M.2 22110
  • NAND Flash Type
    3D TLC
  • Capacity
    480GB~1920GB
  • External DRAM
    Yes
  • Sequential Read Performance (MB/sec)
    Up to 7335
  • Sequential Write Performance (MB/sec)
    Up to 6475
  • ECC Engine
    Low-Density Parity-Check (LDPC) Code
  • IOPS (4K Random Write)
    1083K
  • Standard Operating Temperature (°C )
    0 ~ + 70
  • Storage Temperature(°C )
    -55 ~ +100
  • Thermal Sensor
    Yes
  • Shock
    Operating: Acceleration, 50(G)/11(ms)/half sine
    (compliant with MIL-STD-202G)
    Non-operating: Acceleration, 1500(G)/0.5(ms)/half sine
    (compliant with MIL-STD-883K)
  • Vibration
    Operating: 7.69 GRMS, 20~2000 Hz/random
    (compliant with MIL-STD-810G)
    Non-operating: 4.02 GRMS, 15~2000 Hz/random
    (compliant with MIL-STD-810G)
  • Operating Voltage
    3.3V ± 5%
  • Power Consumption
    Active mode: 9.45 W/Idle mode: 1.95 W
  • Dimension (L x W x H )
    19.85 x 110.00 x 4.08 mm
  • MTBF (hours)
    >3,000,000

Contact Us

If you have questions that our website hasn't answered, please get in touch with us.