M.2

PH920-M280

M.2

PH920-M280

Adopts advanced LDPC ECC engine with 3D NAND SLC-liteX technology to improve reliability
SLC-liteX (P/E cycles: 100K)
Global Wear Leveling
Flash bad-block management
Flash Translation Layer: Page Mapping
S.M.A.R.T.
Power Failure Management
TRIM
Hyper Cache Technology
NVMe Secure Erase
Signed Firmware

Industrial PCIe SSD: PH920-M280

Apacer PH920-M280 is the fastest SSD designed as M.2 2280 mechanical dimensions, providing full compliance with PCIe Gen3 x4 interface and NVMe 1.3 specifications.

Built with a powerful PCIe controller, PH920-M280 delivers outstanding performance in data transfer, reaching up to 314,000/265,000 and 1,740/1,530 MB/s in IOPS and sequential read/write. The extreme thin and light form factor makes PH920-M280 the ideal choice for mobile computing systems, which appears to be the trend in near future.

Regarding reliability, PH920-M280 supports on-the-module ECC as well as efficient Wear Leveling scheme. Furthermore, End-to-End Data Protection guarantees data integrity at multiple points in the path to enable reliable delivery of data transfers.

Security-wise, Advanced Encryption Standard (AES) ensures data security and provides users with a peace of mind knowing their data is safeguarded. With Apacer’s SLC-liteX technology, PH920-M280 can operate on power management modes, which greatly saves on power consumption in terms of power efficiency.

Spec

Model

PH920-M280
Interface

PCIe Gen3 x4
Connector

M.2 M Key
Form Factor

M.2 2280
NAND Flash Type

3D TLC
Capacity

Single side: 160GB
Double side: 320GB~640GB
Sequential Read Performance (MB/sec)

Up to 1740
Sequential Write Performance (MB/sec)

Up to 1530
ECC Engine

Low-Density Parity-Check (LDPC) Code
IOPS (4K Random Write)

265K
Standard Operating Temperature (°C )

0 ~ + 70
Extended Operating Temperature(°C )

-40 ~ +85
Storage Temperature(°C )

-40 ~ +100
H/W Write Protect

Yes
Thermal Sensor

Yes
Shock

Operation: 50G/11ms
(compliant with MIL-STD-202G)
Non-operation: 1500G/0.5ms
(compliant with MIL-STD-883K)
Vibration

Operation: 7.69 Grms, 20~2000 Hz/random
(compliant with MIL-STD-810G)
Non-operation: 4.02 Grms, 15~2000 Hz/random
(compliant with MIL-STD-810G)
Operating Voltage

3.3V ±5%
Power Consumption

Active mode: 1100 mA / Idle mode: 260 mA
Dimension (L x W x H )

Single side: 22.00 x 80.00 x 2.58 mm (max)
Double side: 22.00 x 80.00 x 4.08 mm (max)
MTBF (hours)

>3,000,000