CH710-CF

Global Wear Leveling
Built-in BCH ECC capable of correcting up to 96 bits in 1KB data
Supports S.M.A.R.T
Flash Block Management
Power Failure Management
Page Mapping

Introduction

Apacer industrial CH710-CF card is compliant with the CF 6.1 standard compatible specifications. Apacer adopts the standard 50-pin connector and TLC chip with SLC-liteX technology for the card. It is available in capacities from 8GB to 64GB. The data transfer mode is up to PIO Mode 6, Multiword DMA Mode 4, Ultra DMA Mode 6, with the sequential read/write speed reaching as fast as 115/80 MB/sec. To help data stay correct, this CH710-CF memory card also supports 96-bit ECC function, wear-leveling function, S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) and Supply voltage power-down detection for full power-down robustness, thereby substantially enhancing product reliability.

Spec

Model

CH710-CF
Interface

PC Card Memory Mode; PC Card I/O Mode; True IDE Mode
Connector

50-pin female
Form Factor

CF
Transfer Mode

PIO Mode 6, Multiword DMA Mode 4, Ultra DMA Mode 6
NAND Flash Type

3D TLC
Capacity

8GB~64GB
External DRAM

No
Sequential Read Performance (MB/sec)

Up to 115
Sequential Write Performance (MB/sec)

Up to 80
ECC Engine

Built-in 96-bit per 1K bytes BCH ECC
IOPS (4K Random Write)

Up to 2100
Standard Operating Temperature (°C )

0 ~ + 70
Extended Operating Temperature(°C )

-40 ~ +85
Storage Temperature(°C )

-40 ~ +100
H/W Write Protect

No
Thermal Sensor

No
Shock

Operation: 50G, 11ms
Non-operation: 1500G, 0.5ms
Vibration

Operation:7.69 Grms, 20~2000 Hz/random
(compliant with MIL-STD-810G)
Non-operation:4.02 Grms, 15~2000 Hz/random
(compliant with MIL-STD-810G)
Operating Voltage

3.3 V / 5.0 V ± 5%
Power Consumption

Operating Voltage: 3.3V
– Active mode: 185 mA
– Standby mode: 10 mA
Operating Voltage: 5.0V
– Active mode: 190 mA
– Standby mode: 10 mA
Dimension (L x W x H )

36.4 x 42.8 x 3.3 mm
MTBF (hours)

>3,000,000