SV25P-CFast
SV25P-CFast
- Low-Density Parity-Check (LDPC) Code
- Global Wear Leveling
- Flash bad-block management
- Flash Translation Layer: Page Mapping
- S.M.A.R.T.
- Device Sleep
- ATA Secure Erase
- TRIM Support
- Hyper Cache Technology
- Over-provisioning
- DataRAID™
- SMART Read Refresh™
Introduction
Apacer SV25P-CFast 2.0, utilizing 3D NAND for higher capacity up to 960GB and providing more power efficiency than 2D NAND, is the latest enhancement of conventional CFast form factor that delivers various technological advantages. This new flash memory card comes with SATA 6 Gb/s interface for exceptional performance with data transfer rates up to 560 MB/s in sequential access and 69,000 IOPS in 4KB random access, and consists of SATA-based 7-pin signal segment and 17-pin for power and control purposes. Designed without DRAM on the internal controlling unit, SV25P-CFast 2.0 ensures data integrity by preventing data loss during a sudden power outage.
SV25P-CFast 2.0 guarantees reliability of applications in harsh environments by implementing intelligent Flash Management algorithms and LDPC (Low Density Parity Check) ECC engine to extend SSD endurance and increase data reliability. Furthermore, SV25P-CFast 2.0 is equipped with a built-in thermal sensor to monitor the temperature of the SSD via S.M.A.R.T commands to prevent overheating. Operating under 6 Gb/s interface, SV25P-CFast 2.0 is provided with Apacer latest S.M.A.R.T. that is primarily oriented for the latest SATA interface SSD, for drive lifetime monitoring and analysis. For highly-intensive applications, End-to-End Data Protection ensures that data integrity can be assured at multiple points in the path to enable reliable delivery of data transfers.
-
ModelSV25P-CFast
-
InterfaceSATA 3.2 (6Gb/s)
-
Connector(7+17) pin female
-
Form FactorCFast
-
NAND Flash Type3D TLC
-
Capacity120GB~960GB
-
External DRAMNo
-
Sequential Read Performance (MB/sec)Up to 560
-
Sequential Write Performance (MB/sec)Up to 505
-
ECC EngineLow-Density Parity-Check (LDPC) Code
-
IOPS (4K Random Write)71K
-
Standard Operating Temperature (°C )0 ~ + 70
-
Extended Operating Temperature(°C )-40 ~ +85
-
Storage Temperature(°C )-55 ~ +100
-
H/W Write ProtectOptional
-
Thermal SensorYes
-
ShockOperation: 50G/11ms
(compliant with MIL-STD-202G)
Non-operation: 1500G/0.5ms
(compliant with MIL-STD-883K) -
VibrationOperation: 7.69 Grms, 20~2000 Hz/random
(compliant with MIL-STD-810G)
Non-operation: 4.02 Grms, 15~2000 Hz/random
(compliant with MIL-STD-810G) -
Operating Voltage3.3V ±5%
-
Power ConsumptionActive mode: 300 mA / Idle mode: 70 mA
-
Dimension (L x W x H )42.80 x 36.40 x 3.60 (mm)
-
MTBF (hours)>3,000,000
Contact Us
If you have questions that our website hasn't answered, please get in touch with us.