CoreSnapshot Series

SV25C-M242 CoreSnapshot 2 Cloud Edition

CoreSnapshot Series

SV25C-M242 CoreSnapshot 2 Cloud Edition

Low-Density Parity-Check (LDPC) Code
Global Wear Leveling
Flash bad-block management
Flash Translation Layer: Page Mapping
S.M.A.R.T.
DataDefender™
Device Sleep
ATA Secure Erase
TRIM
Hyper Cache Technology
Over-provisioning
SMART Read Refresh™

Introduction

SV25C-M242 CoreSnapshot 2 Cloud Edition is built with a powerful SATA controller that supports on-the-module ECC as well as efficient wear leveling scheme and implemented with LDPC (Low Density Parity Check) ECC engine to extend SSD endurance and increase data reliability. Furthermore, SV25C-M242 CoreSnapshot 2 Cloud Edition is equipped with a built-in thermal sensor to monitor the temperature of the SSD via S.M.A.R.T commands to prevent overheating. For highly-intensive applications, End-to-End Data Protection ensures that data integrity can be assured at multiple points in the path to enable reliable delivery of data transfers. Security-wise, Advanced Encryption Standard (AES) ensures data security and provides users with peace of mind knowing their data is safeguarded at all times.

On top of that, SV25C-M242 CoreSnapshot 2 Cloud Edition features CoreSnapshot 2 and Double-barreled Solution to optimize the stability of system operation and management. CoreSnapshot 2 ensures that SV25C-M242 can function normally and return to normal operation in the event of unexpected system failures to reduce downtime and maximum output, while Double-barreled Solution extends the practical operating lifespan and integrates seamlessly with alternated RDM platforms, makes monitoring of a complex system much easier and more efficient through the Cloud.

Spec

Model

SV25C-M242 CoreSnapshot 2
Interface

SATA 3.2 (6Gb/s)
Connector

75-pin SATA-based M.2 module pinout
3-pin CoreSnapshot 2 connector
Form Factor

M.2 2242
NAND Flash Type

3D TLC
Capacity

60GB~480GB
External DRAM

No
Sequential Read Performance (MB/sec)

Up to 550
Sequential Write Performance (MB/sec)

Up to 485
ECC Engine

Low-Density Parity-Check (LDPC) Code
IOPS (4K Random Write)

65K
Standard Operating Temperature (°C )

0 ~ + 70
Extended Operating Temperature(°C )

-40 ~ +85
Storage Temperature(°C )

-55 ~ +100
Thermal Sensor

Yes
Shock

Operating:Acceleration, 50(G)/11(ms)/half sine
(compliant with MIL-STD-202G)
Non-operating:Acceleration, 1500(G)/0.5(ms)/half sine
(compliant with MIL-STD-883K)
Vibration

Operation:7.69(Grms), 20~2000(Hz)/random
(compliant with MIL-STD-810G)
Non-operation:4.02(Grms), 15~2000(Hz)/random
(compliant with MIL-STD-810G)
Operating Voltage

3.3 V ± 5%
Power Consumption

Active mode: 400 mA / Idle mode:65 mA
Dimension (L x W x H )

22.00 x 42.00 x 4.43 (mm)
MTBF (hours)

>3,000,000