CoreSnapshot Series

SV250-M242 CoreSnapshot 2 Client Edition

CoreSnapshot Series

SV250-M242 CoreSnapshot 2 Client Edition

  • Low-Density Parity-Check (LDPC) Code
  • Global Wear Leveling
  • Flash bad-block management
  • Flash Translation Layer: Page Mapping
  • S.M.A.R.T.
  • DataDefender™
  • Device Sleep
  • ATA Secure Erase
  • TRIM
  • Hyper Cache Technology
  • Over-provisioning
  • SMART Read Refresh™

Introduction

 

SV250-M242 CoreSnapshot 2 Client Edition is built with a powerful SATA controller that supports on-the-module ECC as well as efficient wear leveling scheme and implemented with LDPC (Low Density Parity Check) ECC engine to extend SSD endurance and increase data reliability. Furthermore, SV250-M242 CoreSnapshot 2 Client Edition is equipped with a built-in thermal sensor to monitor the temperature of the SSD via S.M.A.R.T commands to prevent overheating. For highly-intensive applications, End-to-End Data Protection ensures that data integrity can be assured at multiple points in the path to enable reliable delivery of data transfers. Security-wise, Advanced Encryption Standard (AES) ensures data security and provides users with peace of mind knowing their data is safeguarded at all times.

 

On top of that, SV250-M242 CoreSnapshot 2 Client Edition features CoreSnapshot 2, a system disaster’s savior, to offer an instant whole disk backup and recovery mechanism for SSDs to solve unexpected data loss or OS crush immediately, reducing downtime and maximizing output.

Spec
  • Model
    SV250-M242 CoreSnapshot 2
  • Interface
    SATA 3.2 (6Gb/s)
  • Connector
    75-pin SATA-based M.2 module pinout
    3-pin CoreSnapshot 2 connector
  • Form Factor
    M.2 2242
  • NAND Flash Type
    3D TLC
  • Capacity
    60GB~480GB
  • External DRAM
    No
  • Sequential Read Performance (MB/sec)
    Up to 550
  • Sequential Write Performance (MB/sec)
    Up to 485
  • ECC Engine
    Low-Density Parity-Check (LDPC) Code
  • IOPS (4K Random Write)
    65K
  • Standard Operating Temperature (°C )
    0 ~ + 70
  • Extended Operating Temperature(°C )
    -40 ~ +85
  • Storage Temperature(°C )
    -55 ~ +100
  • Thermal Sensor
    Yes
  • Shock
    Operation: Acceleration, 50(G)/11(ms)/half sine
    (compliant with MIL-STD-202G)
    Non-operation: Acceleration,1,500(G)/0.5(ms)/half sine
    (compliant with MIL-STD-883K)
  • Vibration
    Operation:7.69(Grms), 20~2000(Hz)/random
    (compliant with MIL-STD-810G)
    Non-operation:4.02(Grms), 15~2000(Hz)/random
    (compliant with MIL-STD-810G)
  • Operating Voltage
    3.3V ± 5%
  • Power Consumption
    Active mode: 400 mA / Idle mode:65 mA
  • Dimension (L x W x H )
    22.00 x 42.00 x 4.43 (mm)
  • MTBF (hours)
    >3,000,000

Contact Us

If you have questions that our website hasn't answered, please get in touch with us.