uSSD (BGA SSD)

SV170-μSSD

uSSD (BGA SSD)

SV170-μSSD

Low-Density Parity-Check (LDPC) Code
Global Wear Leveling
Flash bad-block management
Flash Translation Layer: Page Mapping
S.M.A.R.T.
Power Failure Management
ATA Secure Erase
Device Sleep
TRIM
Hyper Cache Technology
Over-Provisioning

Introduction

Apacer ultra-small 16x20mm SSD-μSSD complies with JEDEC MO-276 specification. It features a maximum sequential read/write speed of 560/465 MB/sec. And it integrates key components such as the controller and NAND Flash into a single chip using a single ball grid array package (BGA) technology, breaking the traditional size restrictions and making a great leap forward in terms of technology.

In addition, its characteristics such as wide temperature (-40°C ~+85°C) and surface-mount technology (SMT) provide the most stable storage installation for observation and photography even in high altitudes.

Spec

Model

SV170-μSSD
Interface

SATA 3.2 (6Gb/s)
Connector

BGA 156 Balls
Form Factor

uSSD(BGA SSD)
NAND Flash Type

3D TLC
Capacity

30GB~120GB
Sequential Read Performance (MB/sec)

Up to 560
Sequential Write Performance (MB/sec)

Up to 460
ECC Engine

Low-Density Parity-Check (LDPC) Code
IOPS (4K Random Write)

80K
Standard Operating Temperature (°C )

0 ~ + 70
Extended Operating Temperature(°C )

-40 ~ + 85
Storage Temperature(°C )

-40 ~ + 100
Shock

Operation: 50G/11ms
(compliant with MIL-STD-202G)
Non-operation: 1500G/0.5ms
(compliant with MIL-STD-883K)
Vibration

Operation:7.69 Grms, 20~2000 Hz/random
(compliant with MIL-STD-810G)
Non-operation: 4.02Grms, 15~2000 Hz/sine
(compliant with MIL-STD-810G)
Operating Voltage

3.3V ± 5%
1.8V ± 5%
1.2V ± 5%
Power Consumption

Active mode: 380 mA; Idle mode: 95 mA
Dimension (L x W x H )

16.00 x 20.00 x 1.40 mm
MTBF (hours)

>1,000,000