2.5" SSD Drive

ST180-25

2.5" SSD Drive

ST180-25

Supports large capacity of up to 16TB
Adopts advanced LDPC ECC engine with 3D NAND flash memory to improve reliability
Global Wear Leveling
Flash bad-block management
Flash Translation Layer: Page Mapping
Supports SSDWidget S.M.A.R.T function
Power Failure Management
Support TCG Opal 2.0/AES 256-bit encryption
End-to-End Data Protection
ATA Secure Erase
TRIM
SMART Read Refresh™

Apacer’s ST180-25, utilizing 3D NAND for higher capacity up to 16TB and providing more power efficiency than 2D NAND, is a well-balanced solid-state disk (SSD) drive with standard form factor and great performance. Designed in SATA 6 Gb/s interface, ST180-25 provides full compliance with the SATA Revision 3.1 interface specifications and delivers exceptional read/write speed. For data efficiency, the internal controlling unit of the SSD is engineered with DRAM for enhanced random performance, making it the ideal companion for heavy-loading industrial or server operations.
ST180-25 is built with a powerful SATA controller that supports on-the-module ECC as well as efficient wear leveling scheme and implemented with LDPC (Low Density Parity Check) ECC engine to extend SSD endurance and increase data reliability. Furthermore, ST180-25 is equipped with a built-in thermal sensor to monitor the temperature of the SSD via S.M.A.R.T commands and configured with thermal throttling to dynamically adjust frequency scaling to enhance data reliability and provide sustained performance while overheating. Operating under 6 Gb/s interface, ST180-25 is provided with Apacer latest S.M.A.R.T. that is primarily oriented for the latest SATA interface SSD, for drive lifetime monitoring and analysis. For highly-intensive applications, End-to-End Data Protection ensures that data integrity can be assured at multiple points in the path to enable reliable delivery of data transfers.
Security-wise, Advanced Encryption Standard (AES) ensures data security and provides users with peace of mind knowing their data is safeguarded against unauthorized use at all times. ST180-25 also adopts the latest page mapping file translation layer and comes with various implementations including power saving modes, wear leveling, flash block management, S.M.A.R.T., power failure management, TRIM, DataRAID^TM and SMART Read Refresh^TM.
With exceptional performance, trustable reliability and enhanced data protection, ST180-25 is definitely the ideal storage or cache solution for a variety of applications ranging from industrial, imaging, computing to enterprise markets.

Spec

Model

ST180-25
Interface

SATA 3.1 (6Gb/s)
Connector

(7+15) pin male
Form Factor

2.5”
NAND Flash Type

3D TLC
Capacity

1TB~16TB
External DRAM

Yes
Sequential Read Performance (MB/sec)

Up to 555
Sequential Write Performance (MB/sec)

Up to 520
ECC Engine

Low-Density Parity-Check (LDPC) Code
IOPS (4K Random Write)

82K
Standard Operating Temperature (°C )

0 ~ + 70
Extended Operating Temperature(°C )

-40 ~ + 85 (16TB not support)
Storage Temperature(°C )

-55 ~ +100
Thermal Sensor

Yes
Shock

Operation: 50G/11ms
(compliant with MIL-STD-202G)
Non-operation: 1500G/0.5ms
(compliant with MIL-STD-883K)
Vibration

Operation:7.69 Grms, 20~2000 Hz/random
(compliant with MIL-STD-810G)
Non-operation:4.02 Grms, 15~2000 Hz/random
(compliant with MIL-STD-810G)
Operating Voltage

5.0 V ± 10%
Power Consumption

Active mode: 720 mA; Idle mode: 305 mA
Dimension (L x W x H )

100.00 x 69.85 x 7.00 mm
MTBF (hours)

>3,000,000