CV110-SD

Compliant with SD 4.0 Specification
S.M.A.R.T supported
Wear-Leveling and Block Management
Support Class 10 with UHS-I
Low Power Consumption
Wide Temperature Support(Optional)
DataRAID™
SMART Read Refresh™

Introduction

Apacer SD CV110-SD is compatible with the SD card version 6.1. The command list supports [Physical Layer Specification Ver6.10 Final] definitions. Card Capacity of Non-secure Area, Secure Area Supports [Part 3 Security Specification Ver4.00 Final] Specifications.

The SD 6.1 card comes with 9-pin interface designed to operate at a maximum operating frequency of 208MHz. It can alternate communication protocol between the SD mode and SPI mode. It performs data error detection and correction with very low power consumption. It supports capacity up to 256GB with exFAT SDXC.

Apacer SD CV110-SD Secure Digital 4.0 card with high performance, good reliability and wide compatibility is nowadays one of the most popular cards well adapted for hand-held applications with customized firmware techniques in semi-industrial/medical markets already.

Spec

Model

CV110-SD
Interface

SD 4.0
Form Factor

SD
NAND Flash Type

3D TLC
Capacity

32GB~256GB
Sequential Read Performance (MB/sec)

Up to 90
Sequential Write Performance (MB/sec)

Up to 34
ECC Engine

Built-in advanced ECC algorithm
IOPS (4K Random Write)

1300
Standard Operating Temperature (°C )

-25 ~ + 85
Extended Operating Temperature(°C )

-40 ~ +85
Storage Temperature(°C )

-40 ~ + 85
Shock

1,500G, 0.5ms
Vibration

20Hz~80Hz/1.52mm (frequency/displacement)
80Hz~2,000Hz/20G (frequency/accelerate)
Operating Voltage

2.7V ~ 3.6V
Power Consumption

Active mode: 105 mA & Idle mode: 185 uA
Dimension (L x W x H )

24.00 x 32.00 x 2.10 (mm)
MTBF (hours)

>3,000,000