microSD

CH210-MSD

microSD

CH210-MSD

Compliant with SD 5.0 Specification
S.M.A.R.T supported
Global Wear-Leveling and Block Management
Supports Class 10 with U3 and UHS-I
Low Power Consumption
Wide Temperature Support (Optional)
DataRAID™
SMART Read Refresh™
SLC-LiteX

Introduction

Apacer microSD CH210-MSD is compatible with the microSD card version 5.0. The command list supports [Physical Layer Specification Ver6.10 Final] definitions. Card Capacity of Non-secure Area, Secure Area Supports [Part 3 Security Specification Ver5.0 Final] Specifications.

The microSD 5.0 card comes with 8-pin interface. It can alternate communication protocols between the SD mode and SPI mode. It performs data error detection and correction with very low power consumption. It supports capacity up to 64GB with exFAT SDXC.

Apacer microSD CH210-MSD Secure Digital 5.0 with high performance, good reliability and wide compatibility is nowadays one of the most popular cards with customized firmware techniques in semi-industrial/medical markets already.

Spec

Model

CH210-MSD
Interface

SD 5.0
Form Factor

microSD
NAND Flash Type

3D TLC
Capacity

16GB~64GB
Sequential Read Performance (MB/sec)

Up to 90
Sequential Write Performance (MB/sec)

Up to 70
ECC Engine

Built-in advanced ECC algorithm
IOPS (4K Random Write)

300
Standard Operating Temperature (°C )

-25 ~ + 85
Storage Temperature(°C )

-40 ~ +100
Shock

Operating: Acceleration, 50(G)/11(ms)/half sine
(compliant with MIL-STD-202G)
Non-operating: Acceleration, 1500(G)/0.5(ms)/half sine
(compliant with MIL-STD-883K)
Vibration

Operation: 7.69 Grms, 20~2000 Hz/random
(compliant with MIL-STD-810G)
Non-operation: 4.02 Grms, 15~2000 Hz/random
(compliant with MIL-STD-810G)
Operating Voltage

2.7V ~ 3.6V
Power Consumption

Active mode: 80 mA & Idle mode: 135 uA
Dimension (L x W x H )

15.00 x 11.00 x1.00 (mm)
MTBF (hours)

>3,000,000