UV110-UFM3
UV110-UFM3
- Adopts advanced LDPC ECC engine with 3D NAND flash memory to improve reliability
- Global Wear Leveling
- Flash bad-block management
- Flash Translation Layer: Page Mapping
- S.M.A.R.T.
- Hyper Cache Technology
- SMART Read Refresh™
- Write Protect (Optional)
Industrial USB Module: UV110-UFM3 |
Apacer’s UV110-UFM3 is a high performance, embedded solid state drive (SSD) designed to replace a conventional IDE hard disk drive. As an embedded flash storage, UV110-UFM3 is compliant with USB2.0 and backward compliable with USB1.1 interface.
Utilizing 3D NAND for capacity up to 256GB and providing more power efficiency than 2D NAND, UV110-UFM3 can be plugged into a standard Embedded USB connector commonly found in desktops, portable PC systems and industrial PC systems. Regarding reliability, UV110-UFM3 is implemented with LDPC (Low Density Parity Check) ECC engine to increase data reliability.
In terms of flash management, UV110-UFM3 adopts the latest page mapping file translation layer and comes with various implementations including power saving modes, wear leveling, flash block management, power failure management, S.M.A.R.T., Hyper Cache technology and Smart Read Refresh™.
With cost-effective design, better performance and increased reliability, UV110-UFM3 is well suited for embedded flash storage applications offering new and expanded functionality.
-
UV110-UFM3
-
USB 2.0
-
10-pin USB (2 x 5 header)
-
USB Disk Module
-
3D TLC
-
128GB~256GB
-
Up to 37
-
Up to 31
-
Low-Density Parity-Check (LDPC) Code
-
400
-
0 ~ + 70
-
-40 ~ + 85
-
-40 ~ + 100
-
No
-
Optional
-
Operating: Acceleration, 50(G)/11(ms)/half sine
(compliant with MIL-STD-202G)
Non-operating: Acceleration, 1500(G)/0.5(ms)/half sine
(compliant with MIL-STD-883K) -
Operation:7.69 Grms, 20~2000 Hz/random
(compliant with MIL-STD-810G)
Non-operation:4.02 Grms, 15~2000 Hz/random
(compliant with MIL-STD-810G) -
5.0 V ± 5%
-
Active mode: 100 mA; Idle mode: 75 mA
-
32.50 x 24.00 x 5.00 mm
-
>3,000,000