Module

UV110-UFM1

Module

UV110-UFM1

  • Adopts advanced LDPC ECC engine with 3D NAND flash memory to improve reliability
  • Global Wear Leveling
  • Flash bad-block management
  • Flash Translation Layer: Page Mapping
  • S.M.A.R.T.
  • Hyper Cache Technology
  • Smart Read Refresh™
  • Write Protect (Optional)

Industrial USB Module: UV110-UFM1

Apacer’s UV110-UFM1 is a high performance, embedded solid state drive (SSD) designed to replace a conventional IDE hard disk drive. As an embedded flash storage, UV110-UFM1 is compliant with USB2.0 and backward compliable with USB1.1 interface.
Utilizing 3D NAND for capacity up to 256GB and providing more power efficiency than 2D NAND, UV110-UFM1 can be plugged into a standard Embedded USB connector commonly found in desktops, portable PC systems and industrial PC systems. Regarding reliability, UV110-UFM1 is implemented with LDPC (Low Density Parity Check) ECC engine to increase data reliability.
In terms of flash management, UV110-UFM1 adopts the latest page mapping file translation layer and comes with various implementations including power saving modes, wear leveling, flash block management, power failure management, S.M.A.R.T., Hyper Cache technology and Smart Read Refresh™.
With cost-effective design, better performance and increased reliability, UV110-UFM1 is well suited for embedded flash storage applications offering new and expanded functionality.

Spec
  • Model
    UV110-UFM1
  • Interface
    USB 2.0
  • Connector
    10-pin USB (2 x 5 header)
  • Form Factor
    USB Disk Module
  • NAND Flash Type
    3D TLC
  • Capacity
    128GB~256GB
  • Sequential Read Performance (MB/sec)
    Up to 37
  • Sequential Write Performance (MB/sec)
    Up to 31
  • ECC Engine
    Low-Density Parity-Check (LDPC) Code
  • IOPS (4K Random Write)
    400
  • Standard Operating Temperature ( °C )
    0 ~ + 70
  • Extended Operating Temperature ( °C )
    -40 ~ + 85
  • Storage Temperature ( °C )
    -55 ~ + 100
  • Housing
    No
  • H/W Write Protect
    Optional
  • Screw Hole
    Yes
  • Shock
    Operating: Acceleration, 50(G)/11(ms)/half sine
    (compliant with MIL-STD-202G)
    Non-operating: Acceleration, 1500(G)/0.5(ms)/half sine
    (compliant with MIL-STD-883K)
  • Vibration
    Operation:7.69 Grms, 20~2000 Hz/random
    (compliant with MIL-STD-810G)
    Non-operation:4.02 Grms, 15~2000 Hz/random
    (compliant with MIL-STD-810G)
  • Operating Voltage
    5.0 V ± 5%
  • Power Consumption
    Active mode: 100 mA; Idle mode: 75 mA
  • Dimension (L x W x H )
    37.80 x 26.65 x 10.91 mm
  • MTBF (hours)
    >3,000,000

Contact Us

If you have questions that our website hasn't answered, please get in touch with us.