UH110-UFD4
UH110-UFD4
- Write Protect Switch
- Adopts advanced LDPC ECC engine with 3D NAND flash memory to improve reliability
- Global Wear Leveling
- Flash bad-block management
- 4K Page Mapping
- Power Failure Management
- S.M.A.R.T.
- SLC-liteX
- SMART Read Refresh™
Industrial USB: UH110-UFD4 |
Apacer’s UH110-UFD4 utilizes 3D NAND for higher capacity up to 8GB and provides more power efficiency than 2D NAND, with the aim of replacing a conventional IDE hard disk drive. With exquisite size and robust metal housing, UH110-UFD4 prevents mechanical interference and has hardware mechanism to active write protection.
UH110-UFD4 is a new generation USB flash drive compatible with the latest USB specification – USB 3.1 Gen1 (SuperSpeed), with a maximum transfer rate of 5.0 Gbps. The connector is backward compatible with USB 2.0 and USB 1.1 interfaces. With compliance with USB 3.1 specification, this USB drive can deliver up to 265 MB/s outstanding performance.
Reliability wise, UH110-UFD4 is implemented with LDPC (Low Density Parity Check) ECC engine to extend SSD endurance and increase data reliability while reading raw data inside a flash chip. In addition, the drive comes with various implementations including powerful hardware ECC engine, Wear Leveling, flash block management, S.M.A.R.T., Page Mapping,etc. This product is well suited for portable flash storage applications while operating at minimal power consumption.
-
ModelUH110-UFD4
-
InterfaceUSB 3.2 Gen1
-
ConnectorUSB Type-A
-
Form FactorUSB Flash Drive
-
NAND Flash Type3D TLC
-
Capacity4GB~8GB
-
Sequential Read Performance (MB/sec)Up to 265
-
Sequential Write Performance (MB/sec)Up to 50
-
ECC EngineLow-Density Parity-Check (LDPC) Code
-
IOPS (4K Random Write)1100
-
Standard Operating Temperature ( °C )0 ~ + 70
-
Extended Operating Temperature ( °C )-40 ~ + 85
* Not supported on 4GB -
Storage Temperature ( °C )-55 ~ + 100
-
HousingYes
-
H/W Write ProtectYes
-
Screw HoleNo
-
Cable-less SolutionNo
-
Thermal SensorNo
-
ShockOperation: 50G/11ms
(compliant with MIL-STD-202G)
Non-operation: 1500G/0.5ms
(compliant with MIL-STD-883K) -
VibrationOperation:7.69 Grms, 20~2000 Hz/random
(compliant with MIL-STD-810G)
Non-operation:4.02 Grms, 15~2000 Hz/random
(compliant with MIL-STD-810G) -
Operating Voltage5.0 V ± 5%
-
Power ConsumptionActive mode: 185 mA; Idle mode: 75 mA
-
Dimension (L x W x H )51.15 x 17.20 x 7.70 mm
-
MTBF (hours)>3,000,000
Contact Us
If you have questions that our website hasn't answered, please get in touch with us.