Drive

UV110-UFD5

Drive

UV110-UFD5

ESD Prevention:
Air discharge ±15KV
Contact discharge ±8KV
Adopts advanced LDPC ECC engine with 3D NAND flash memory to improve reliability
Global Wear Leveling
Flash bad-block management
4K Page Mapping
Power Failure Management
S.M.A.R.T.
Hyper Cache Te

Industrial USB: UV110-UFD5

Apacer’s UV110-UFD5 utilizes 3D NAND for higher capacity up to 256GB, provides more power efficiency than 2D NAND and enhances environment and ESD protection, with the aim of replacing a conventional IDE hard disk drive.
UV110-UFD5 is a new generation USB flash drive compatible with the latest USB specification – USB 3.2 Gen1 Super Speed, with a maximum transfer rate of 5.0 Gb/s. The connector is backward compatible with USB 2.0 and USB 1.1 interfaces. With compliance with USB 3.2 specification, this USB drive can deliver up to 275 MB/s outstanding performance.
Reliability wise, UV110-UFD5 is implemented with LDPC (Low Density Parity Check) ECC engine to extend SSD endurance and increase data reliability while reading raw data inside a flash chip. In addition, the drive comes with various implementations including powerful hardware ECC engine, Wear Leveling, flash block management, S.M.A.R.T., Page Mapping, etc. This product is well suited for portable flash storage applications while operating at minimal power consumption.

Spec

Model

UV110-UFD5
Interface

USB 3.2 Gen1
Connector

USB Type-A
Form Factor

USB Flash Drive
NAND Flash Type

3D TLC
Capacity

128GB~256GB
Sequential Read Performance (MB/sec)

Up to 275
Sequential Write Performance (MB/sec)

Up to 190
ECC Engine

Low-Density Parity-Check (LDPC) Code
IOPS (4K Random Write)

1000
Standard Operating Temperature (°C )

0 ~ + 70
Extended Operating Temperature(°C )

-40 ~ + 85
Storage Temperature(°C )

-40 ~ + 100
Housing

Yes
H/W Write Protect

No
Shock

Operating: Acceleration, 50(G)/11(ms)/half sine
(compliant with MIL-STD-202G)
Non-operating: Acceleration, 1500(G)/0.5(ms)/half sine
(compliant with MIL-STD-883K)
Vibration

Operation:7.69 Grms, 20~2000 Hz/random
(compliant with MIL-STD-810G)
Non-operation:4.02 Grms, 15~2000 Hz/random
(compliant with MIL-STD-810G)
Operating Voltage

5.0 V ± 5%
Power Consumption

Active mode: 215 mA; Idle mode: 85 mA
Dimension (L x W x H )

56.05 x 18.00 x 8.50 mm
MTBF (hours)

>3,000,000