UT110-UFD2
UT110-UFD2
- Adopts advanced LDPC ECC engine with 3D NAND flash memory to improve reliability
- Global Wear Leveling
- Flash bad-block management
- 4K Page Mapping
- Power Failure Management
- S.M.A.R.T.
- Hyper Cache Technology
- SMART Read Refresh™
Industrial USB: UT110-UFD2 |
Apacer’s UT110-UFD2 is a new generation USB flash drive compatible with the USB 3.2 Gen1 Super Speed, with a maximum transfer rate of 5 Gb/s designed to replace a conventional IDE hard disk drive. The connector is backward compatible with USB 2.0 and USB 1.1 interfaces. With compliance with USB 3.2 specification, this USB drive can deliver up to 270 MB/s outstanding performance.
Utilizing 3D NAND and providing more power efficiency than 2D NAND, UT110-UFD2 is not only implemented with LDPC (Low Density Parity Check) ECC engine to extend SSD endurance and increase data reliability, but also built with the highest durability and ruggedness with a special Chip-On-Board (COB) packaging technology, which allows your precious files to be safely stored and protected against dust, water and shock at all times.
In terms of flash management, UT110-UFD2 adopts the latest page mapping file translation layer and comes with various implementations including powerful hardware ECC engine, wear leveling, flash block management, S.M.A.R.T., power failure management, Hyper Cache technology and SMART Read Refresh™. This product is well suited for embedded flash storage applications offering new and expanded functionality as well as more cost-effective design, better performance and increased reliability.
-
ModelUT110-UFD2
-
InterfaceUSB 3.2 Gen1
-
ConnectorUSB Type-A
-
Form FactorUSB Flash Drive
-
NAND Flash Type3D TLC
-
Capacity64GB
-
Sequential Read Performance (MB/sec)Up to 270
-
Sequential Write Performance (MB/sec)Up to 85
-
ECC EngineLow-Density Parity-Check (LDPC) Code
-
IOPS (4K Random Write)500
-
Standard Operating Temperature (°C )0 ~ + 70
-
Extended Operating Temperature(°C )No
-
Storage Temperature(°C )-40 ~ + 100
-
HousingYes
-
H/W Write ProtectNo
-
ShockOperating: Acceleration, 50(G)/11(ms)/half sine
(compliant with MIL-STD-202G)
Non-operating: Acceleration, 1500(G)/0.5(ms)/half sine
(compliant with MIL-STD-883K) -
VibrationOperation:7.69 Grms, 20~2000 Hz/random
(compliant with MIL-STD-810G)
Non-operation:4.02 Grms, 15~2000 Hz/random
(compliant with MIL-STD-810G) -
Operating Voltage5.0 V ± 5%
-
Power ConsumptionActive mode: 130 mA; Idle mode: 60 mA
-
Dimension (L x W x H )23.10 x 14.25 x 6.90 mm
-
MTBF (hours)>3,000,000
Contact Us
If you have questions that our website hasn't answered, please get in touch with us.