CoreRescue Series

SV25C-25 CoreSnapshot 2 Cloud Edition

CoreRescue Series

SV25C-25 CoreSnapshot 2 Cloud Edition

  • Low-Density Parity-Check (LDPC) Code
  • Global Wear Leveling
  • Flash bad-block management
  • Flash Translation Layer: Page Mapping
  • S.M.A.R.T.
  • DataDefender™
  • Device Sleep
  • ATA Secure Erase
  • TRIM
  • Hyper Cache Technology
  • Over-provisioning
  • SMART Read Refresh™

Introduction

 

SV25C-25 CoreSnapshot 2 Cloud Edition is built with a powerful SATA controller that supports on-the-module ECC as well as efficient wear leveling scheme and implemented with LDPC (Low Density Parity Check) ECC engine to extend SSD endurance and increase data reliability. Furthermore, SV25C-25 CoreSnapshot 2 Cloud Edition is equipped with a built-in thermal sensor to monitor the temperature of the SSD via S.M.A.R.T commands to prevent overheating. For highly-intensive applications, End-to-End Data Protection ensures that data integrity can be assured at multiple points in the path to enable reliable delivery of data transfers. Security-wise, Advanced Encryption Standard (AES) ensures data security and provides users with peace of mind knowing their data is safeguarded at all times.

 

On top of that, SV25C-25 CoreSnapshot 2 Cloud Edition features CoreSnapshot 2 and Double-barreled Solution to optimize the stability of system operation and management. CoreSnapshot 2 ensures that SV25C-25 can function normally and return to normal operation in the event of unexpected system failures to reduce downtime and maximum output, while Double-barreled Solution extends the practical operating lifespan and integrates seamlessly with alternated RDM platforms, makes monitoring of a complex system much easier and more efficient through the Cloud.

 

  • SV25C-25 CoreSnapshot 2
  • SATA 3.2 (6Gb/s)
  • 7-pin SATA signal connector
    15-pin SATA power connector
    3-pin CoreSnapshot 2 connector
  • 2.5”
  • 3D TLC
  • 60GB~480GB
  • No
  • Up to 550
  • Up to 485
  • Low-Density Parity-Check (LDPC) Code
  • 65K
  • 0 ~ + 70
  • -40 ~ +85
  • -55 ~ +100
  • Yes
  • Operation: Acceleration, 50(G)/11(ms)/half sine
    (compliant with MIL-STD-202G)
    Non-operation: Acceleration,1,500(G)/0.5(ms)/half sine
    (compliant with MIL-STD-883K)
  • Operation:7.69(Grms), 20~2000(Hz)/random
    (compliant with MIL-STD-810G)
    Non-operation:4.02(Grms), 15~2000(Hz)/random
    (compliant with MIL-STD-810G)
  • 5.0 V ± 10%
  • Active mode: 275 mA / Idle mode:45 mA
  • 100.00 x 69.85 x 6.90 (mm)
  • >3,000,000