CFast

SU220-CFast

CFast

SU220-CFast

Built-in hardware ECC
Global wear-leveling
Flash bad-block management
S.M.A.R.T.
Power failure management
SLC-lite technology
ATA secure erase
TRIM
Supports CoreAnalyzer

Introduction

Along with SM220-CFast MLC product family, Apacer offers SU220-CFast with more enhanced endurance than MLC by implementing SLC-Lite technology. SLC-lite is Apacer's proprietary technology that strikes a cost-performance balance between MLC and SLC flash types and it is an ideal alternative solution for mission-critical embedded or industrial applications. This new flash memory card comes with SATA 6.0 Gbps interface for higher performance and consists of SATA-based 7-pin signal segment and 17-pin for power and control purposes. For data efficiency, the internal controlling unit of the SU220-CFast is engineered with DRAM for enhanced random performance which achieves data transfer rates up to 535 MB/s in sequential access and 68,000 IOPS in 4KB random access. In addition, Apacer CFast cards come with S.M.A.R.T. for lifetime monitoring and customization support if write protection is required. Apacer SU220-CFast guarantees reliability of applications in harsh environments by implementing intelligent Flash Management algorithms and Error Correction. Together with its small form factor nature, Apacer SU220-CFast is definitely the ideal solution to replace conventional PATA-based CompactFlash for applications in industrial computing systems, mobile computers and video processing instruments.

Spec

Model

SU220-CFast
Interface

SATA 3.2 (6Gb/s)
Connector

(7+17) pin female
Form Factor

CFast
NAND Flash Type

MLC
Capacity

8GB~128GB
External DRAM

Yes
Sequential Read Performance (MB/sec)

Up to 535
Sequential Write Performance (MB/sec)

Up to 480
ECC Engine

Built-in 72-bit per 1K bytes BCH ECC
IOPS (4K Random Write)

61K
Standard Operating Temperature (°C )

0 ~ + 70
Extended Operating Temperature(°C )

-40 ~ +85
Storage Temperature(°C )

-40 ~ +100
H/W Write Protect

Optional
Thermal Sensor

Optional
Shock

Operation: 50G, 11ms
Non-operation: 1500G, 0.5ms
Vibration

Operation: 7.69 Grms, 20~2000 Hz/random
(compliant with MIL-STD-810G)
Non-operation: 15 G, 10 ~ 2000 Hz/sine
Operating Voltage

3.3V ±5%
Power Consumption

Active mode: 435 mA & Idle mode: 105 mA
Dimension (L x W x H )

42.80 x 36.40 x 3.60 (mm)
MTBF (hours)

>1,000,000