CFast

SM22P-CFast

CFast

SM22P-CFast

Advanced 4K Page Mapping Technology
Apacer CorePower Technology
Built in hardware ECC
Wide Temperature support
Built-in ATA Secure Erase and S.M.A.R.T. Functions
DEVSLP Support (Optional)
Higher IOPS (with DRAM)

Introduction

Featuring CorePower technology, Apacer SM22P-CFast has been proved capable of protecting data from sudden power loss after conducting comprehensive testing. With firmware routines and the design of intelligent hardware architecture, SM22P-CFast ensures that all data can be stored on the NAND flash in the event of power outage. CFast™ is a crossover between the CompactFlash™ (CF) card form factor and the Serial ATA (SATA) interface. Therefore, it can replace both roles of HDDs and CompactFlash™ cards in applications requiring small form factors and harsh environmental conditions. By implementing a backup power supply that lengthens the emergent hold-on time for the controller to move all the cached data into NAND flash, the internal controlling unit of the SM22P-CFast 2.0 is engineered with DRAM for enhanced random performance without any concern over data integrity.

Spec

Model

SM22P-CFast
Interface

SATA 3.2 (6Gb/s)
Connector

(7+17) pin female
Form Factor

CFast
NAND Flash Type

MLC
Capacity

8GB~128GB
External DRAM

Yes
Sequential Read Performance (MB/sec)

Up to 475
Sequential Write Performance (MB/sec)

Up to 85
ECC Engine

Built-in 72-bit per 1K bytes BCH ECC
IOPS (4K Random Write)

16K
Standard Operating Temperature (°C )

0 ~ + 70
Extended Operating Temperature(°C )

-40 ~ +85
Storage Temperature(°C )

-40 ~ +100
H/W Write Protect

Optional
Thermal Sensor

Optional
Shock

Operation: 50G, 11ms
Non-operation: 1500G, 0.5ms
Vibration

Operation: 7.69 Grms, 20~2000 Hz/random
(compliant with MIL-STD-810G)
Non-operation: 15 G, 10 ~ 2000 Hz/sine
Operating Voltage

3.3V ±5%
Power Consumption

Active mode: 610 mA & Idle mode: 140 mA
Dimension (L x W x H )

42.80 x 36.40 x 3.60 (mm)
MTBF (hours)

>1,000,000