M.2

SH250-M280

M.2

SH250-M280

Low-Density Parity-Check (LDPC) Code
Global Wear Leveling
Flash Bad-block Management
Flash Translation Layer: Page Mapping
S.M.A.R.T.
DataDefender™
Device Sleep
ATA Secure Erase
TRIM
SMART Read Refresh™
SLC-liteX (P/E cycle: 100K)

Industrial SSD: SH250-M280

Apacer’s SH250-M280, utilizing 3D NAND for higher capacity up to 640GB and providing more power efficiency than 2D NAND, is the next generation Solid State Drive (SSD) with compact and high-speed storage and great performance. Designed in SATA 6 Gb/s interface, SH250-M280 provides full compliance with the latest SATA Revision 3.2 interface specifications and delivers exceptional read/write speed, making it the leading add-in storage solution for future host computing systems.

SH250-M280 is built with a powerful SATA controller that supports on-the-module ECC as well as efficient wear leveling scheme and implemented with LDPC (Low Density Parity Check) ECC engine to extend SSD endurance and increase data reliability. With Apacer’s SLC-liteX technology, SH250-M280 performs with higher number of P/E cycles up to 100,000 times. Furthermore, SH250-M280 is equipped with a built-in thermal sensor to monitor the temperature of the SSD via S.M.A.R.T commands to prevent overheating. Operating under 6 Gb/s interface, SH250-M280 is provided with Apacer latest S.M.A.R.T. that is primarily oriented for the latest SATA interface SSD, for drive lifetime monitoring and analysis. For highly-intensive applications, End-to-End Data Protection ensures that data integrity can be assured at multiple points in the path to enable reliable delivery of data transfers.

Security-wise, Advanced Encryption Standard (AES) ensures data security and provides users with peace of mind knowing their data is safeguarded at all times. SH250-M280 also adopts the latest page mapping file translation layer and comes with various implementations including power saving modes, wear leveling, flash block management, S.M.A.R.T., TRIM, DataDefender™ and SMART Read Refresh™. With exceptional performance, trustable reliability and enhanced data protection, SH250-M280 is definitely the ideal storage or cache solution for a variety of applications ranging from industrial, imaging, computing to enterprise markets.

Spec

Model

SH250-M280
Interface

SATA 3.2 (6Gb/s)
Connector

M.2 B & M key
Form Factor

M.2 2280
Operation Mode

3D TLC
Capacity

10GB~320GB
External DRAM

No
Sequential Read Performance (MB/sec)

Up to 560
Sequential Write Performance (MB/sec)

Up to 510
ECC Engine

Low-Density Parity-Check (LDPC) Code
IOPS (4K Random Write)

70K
Standard Operating Temperature (°C )

0 ~ + 70
Extended Operating Temperature(°C )

-40 ~ + 85
Storage Temperature(°C )

-55 ~ + 100
Thermal Sensor

Yes
Shock

Operation: 50G/11ms
Non-operation: 1500G/0.5ms
(compliant with MIL-STD-883K)
Vibration

Operation:7.69 Grms, 20~2000 Hz/random
(compliant with MIL-STD-810G)
Non-operation: 4.02Grms, 15~2000 Hz/sine
(compliant with MIL-STD-810G)
Operating Voltage

3.3 V ± 5%
Power Consumption

Active mode: 450 mA; Idle mode: 65 mA
Dimension (L x W x H )

Single side: 80.00 x 22.00 x 2.38 mm
Double side: 80.00 x 22.00 x 3.88 mm
MTBF (hours)

>3,000,000