SSD Module

SDM5A 7P/180D LP2

SSD Module

SDM5A 7P/180D LP2

7-pin SATA connector
Unique Hook Design
Power Cable-less Solution
Perfect Solution for 1U System
TRIM Command Support
Write Protect by hardware switch
Built-in ATA Secure Erase and S.M.A.R.T. Functions
Global Wear-Leveling and Block Management

Introduction

Apacer’s SDM5 (SATA Disk Module 5) 7P/90D LP2 is Apacer’s next generation disk-on-module (DOM) series that offers elevated speed boost and higher error correction capabilities. Built with SATA 6.0 Gb/s interface, SDM5 delivers high performance and wide compatibility.

With its SATA interface compliance and compact size, this high-speed disk module defines an ideal balance of performance, capacities, reliability and cost. SDM5 is suitable in industrial applications and light operating systems for specific operations. The architectural nature of SATA disk module provides higher resistance to external environmental influences and better flexibility for motherboard space.

Spec

Model

SDM5A 7P/180D LP2
Interface

SATA 3.2 (6Gb/s)
Connector

7-pin male
Form Factor

SSD Module
NAND Flash Type

SLC
Capacity

8GB~32GB
External DRAM

No
Sequential Read Performance (MB/sec)

Up to 435
Sequential Write Performance (MB/sec)

Up to 215
ECC Engine

Built-in 40-bit per 1K bytes BCH ECC
Standard Operating Temperature (°C )

0 ~ + 70
Extended Operating Temperature(°C )

-40 ~ + 85
Storage Temperature(°C )

-40 ~ + 100
Housing

No
H/W Write Protect

Optional
Screw Hole

Yes
Cable-less Solution

Optional (7+2 cable-less, Pin 7 Power cable-less)
Shock

Operation: 50G, 11ms
Non-operation: 1500G, 0.5ms
Vibration

Operation: 7.69 Grms, 20~2000 Hz/random (compliant with MIL-STD-810G)
Non-operation: 4.02 Grms, 15 ~ 2000 Hz/sine (compliant with MIL-STD-810G)
Operating Voltage

5.0 V ± 5%
Power Consumption

Active mode: 260 mA; Idle mode: 60 mA
Dimension (L x W x H )

33.00 x 29.30 x 8.85 mm
MTBF (hours)

>2,000,000