Industrial SD H1-M

Compliant with SD 3.0 Specification
S.M.A.R.T supported
Wear-Leveling and Block Management
Support Class 10 with UHS-I
Low Power Consumption
Wide Temperature Support(Optional)

Introduction

Apacer Industrial Secure Digital 3.0 card is ideal for its high performance, good reliability and wide compatibility, not to mention that it’s well adapted for hand-held applications in semi-industrial/medical markets already. The H1-M series providing wide range capacities from 4GB to 128GB fully compliant to SD3.0, and SD2.0 specifications are built with MLC NAND Flash and the latest firmware including read disturb , wear leveling & bad block management algorithms. Furthermore, this product also has an optional -45C to 85C extended temperature range version to withstand the extreme environmental condition.

Spec

Model

Industrial SD H1-M
Interface

SD 3.0
Form Factor

SD
NAND Flash Type

MLC
Capacity

4GB~128GB
Sequential Read Performance (MB/sec)

Up to 43
Sequential Write Performance (MB/sec)

Up to 30
ECC Engine

Built-in 42-bit per 1K bytes BCH ECC
Standard Operating Temperature (°C )

-25 ~ + 85
Extended Operating Temperature(°C )

-40 ~ +85
Storage Temperature(°C )

-40 ~ + 85
Shock

(Operating)1,500G, 0.5ms
Vibration

20Hz~80Hz/1.52mm (frequency/displacement)
80Hz~2,000Hz/20G (frequency/accelerate)
Operating Voltage

2.7V ~ 3.6V
Power Consumption

Active mode: 145 mA & Idle mode: 235 uA
Dimension (L x W x H )

24.00 x 32.00 x 2.10 (mm)
MTBF (hours)

>3,000,000