microSD

Industrial microSD H1-SL

microSD

Industrial microSD H1-SL

Compliant with SD 3.0 Specification
S.M.A.R.T Supported
Support SD Mode and SPI Mode
Wear-leveling and Block Management
Support Class 10 with UHS-I
SLC-lite Technology
Low Power Consumption
Auto Read Refresh
Power Failure Management

Introduction

Apacer Industrial microSD H1-SL series conforming to SD3.0 specification supports speed class up to U3 through UHS-I. The microSD H1-SL 3.0 card bulit with MLC NAND Flash is capable of delivering better performance by the latest firmware architecture including a powerful built-in Error Correction, Read Retry , Wear-leveling and Bad Block Management algorithms.
Furthermore, with Apacer’s SLC-lite technology, it performs with an outstanding number of P/E cycles up to 20,000 , but lower cost than SLC. This product is well suited for portable flash storage applications while operating at minimal power consumption.

Spec

Model

Industrial microSD H1-SL
Interface

SD 3.0
Form Factor

microSD
NAND Flash Type

MLC
Capacity

4GB~32GB
Sequential Read Performance (MB/sec)

Up to 43
Sequential Write Performance (MB/sec)

Up to 40
ECC Engine

Built-in 42-bit per 1K bytes BCH ECC
Standard Operating Temperature (°C )

-25 ~ + 85
Extended Operating Temperature(°C )

-40 ~ +85
Storage Temperature(°C )

-40 ~ + 85
Shock

Operation: 50G, 11ms
Non-operation: 1500G, 0.5ms
Vibration

20Hz~80Hz/1.52mm (frequency/displacement)
80Hz~2,000Hz/20G (frequency/accelerate)
Operating Voltage

2.7V ~ 3.6V
Power Consumption

Active mode: 140mA & Idle mode: 245 uA
Dimension (L x W x H )

15.00 x 11.00 x1.00 (mm)
MTBF (hours)

>3,000,000