Module

UDM2A LP 90D (Type E)

Module

UDM2A LP 90D (Type E)

  • Built-in hardware ECC
  • Global wear-leveling
  • Flash bad-block management
  • S.M.A.R.T.

Introduction

Apacer’s UDM2A LP 90D (Type E) is a high performance, highly reliable, high endurance USB2.0 flash disk module in a small form factor designed for embedded applications or the system as a boot drive. The 10-pin USB connector on the Type E with pitch size 2.00 mm could perfectly fit in low profile system. The device built with premium SLC delivers the data integrity and highest endurance in a wide rage of platform.

Spec
  • Model
    UDM2A LP 90D (Type E)
  • Interface
    USB 2.0
  • Connector
    20-pin (2x10) female header
  • Form Factor
    USB Disk Module
  • NAND Flash Type
    SLC
  • Capacity
    256MB~32GB
  • Sequential Read Performance (MB/sec)
    Up to 44
  • Sequential Write Performance (MB/sec)
    Up to 41
  • ECC Engine
    Built-in 72-bit per 1K bytes BCH ECC
  • IOPS (4K Random Write)
    105
  • Standard Operating Temperature (°C )
    0 ~ + 70
  • Extended Operating Temperature(°C )
    -40 ~ + 85
  • Storage Temperature(°C )
    -40 ~ + 100
  • H/W Write Protect
    Optional
  • Screw Hole
    Yes
  • Shock
    Operating: Acceleration, 50(G)/11(ms)/half sine
    (compliant with MIL-STD-202G)
    Non-operating: Acceleration, 1500(G)/0.5(ms)/half sine
    (compliant with MIL-STD-883K)
  • Vibration
    Operation:7.69 Grms, 20~2000 Hz/random
    (compliant with MIL-STD-810G)
    Non-operation:4.02 Grms, 15~2000 Hz/random
    (compliant with MIL-STD-810G)
  • Operating Voltage
    5.0 V ± 5%
  • Power Consumption
    Active mode: 125 mA; Idle mode:50 mA
  • Dimension (L x W x H )
    37.80 x 26.65 x 10.76 mm
  • MTBF (hours)
    >2,000,000

Contact Us

If you have questions that our website hasn't answered, please get in touch with us.