SDM5A-M 7P/270D N1
SDM5A-M 7P/270D N1
- 7-pin SATA connector
- Unique Hook Design
- Power Cable-less Solution
- Perfect Solution for 1U System
- TRIM Command Support
- Write Protect by hardware switch (optional)
- Built-in ATA Secure Erase and S.M.A.R.T. Functions
- Global Wear-Leveling and Block Management
Introduction |
Apacer’s SDM5A-M (SATA Disk Module 5A-M) is our next generation disk-on-module (DOM) series that offers elevated speed boost and higher error correction capabilities. Built with SATA 6.0 Gb/s interface, SDM5A-M delivers exceptional performance in data transfer.
With its SATA interface compliance and compact size, this high-speed disk module defines an ideal balance of performance, capacities, reliability and cost. SDM5A-M is effective in boot industrial applications and light operating systems for specific operations, while with some extra memory space for data storage. The architectural nature of SATA disk module provides higher resistance to external environmental influences and better flexibility for motherboard space.
Regarding data reliability, SDM5A-M is built in with powerful ECC engine that can correct up to 40-bit per 1KB data. In addition, the controller unit of this DOM device supports wear-leveling, SMART and power failure management for data integrity. With its trustable reliability, performance and cost effectiveness, Apacer’s SDM5A-M is definitely the ideal storage or cache solution for embedded and industrial computers, servers and thin clients.
-
ModelSDM5A-M 7P/270D N1
-
InterfaceSATA 3.2 (6Gb/s)
-
Connector7-pin male
-
Form FactorSSD Module
-
NAND Flash TypeMLC
-
Capacity8GB~64GB
-
External DRAMNo
-
Sequential Read Performance (MB/sec)Up to 245
-
Sequential Write Performance (MB/sec)Up to 75
-
ECC EngineBuilt-in 40-bit per 1K bytes BCH ECC
-
Standard Operating Temperature (°C )0 ~ + 70
-
Extended Operating Temperature(°C )-40 ~ + 85
-
Storage Temperature(°C )40 ~ + 100
-
HousingNo
-
H/W Write ProtectOptional
-
Screw HoleYes
-
Cable-less SolutionOptional (7+2 cable-less, Pin 7 Power cable-less)
-
ShockOperation: 50G, 11ms
Non-operation: 1500G, 0.5ms -
VibrationOperation: 7.69 Grms, 20~2000 Hz/random (compliant with MIL-STD-810G)
Non-operation: 4.02 Grms, 15 ~ 2000 Hz/sine (compliant with MIL-STD-810G) -
Operating Voltage5.0 V ± 5%
-
Power ConsumptionActive mode: 205 mA; Idle mode: 80 mA
-
Dimension (L x W x H )52.50 x 23.00 x 15.20 mm
-
MTBF (hours)>1,000,000
Contact Us
If you have questions that our website hasn't answered, please get in touch with us.