2.5" SSD驱动器

SM170-25

2.5" SSD驱动器

SM170-25

  • Low-Density Parity-Check (LDPC) Code
  • Bad Block Management
  • Global Wear Leveling
  • Power Failure Management
  • ATA Secure Erase
  • Flash Translation Layer: Page Mapping
  • TRIM
  • Hyper Cache Technology
  • SMART Read Refresh™
  • S.M.A.R.T. and SSD Widget

Your Reliable Storage Option with Outstanding Performance – Explore More on SM170-25

 

Worrying poor performance and reliability of your storage devices harming your data? Apacer’s SM170-25 is designed to meet the growing demands of today’s server and networking application. Built with full compliance to SATA 6 Gb/s interface, delivering exceptional read and write speeds that keep your systems running smoothly. These features make it the perfect choice for demanding industrial or server operations with heavy workloads.

 

With Apacer’s storage solutions, you’ll experience:

  • Superior Power Efficiency: 3D NAND Technology offers better performance than 2D NAND.
  • Outstanding Data Transmission: on-the-module ECC provides extraordinary data transfer performance.
  • Ensure Reliability: S.M.A.R.T.: Provide proactive SSD health management.

 

Equipped with advanced technologies support:

  • LDPC (Low Density Parity Check) ECC Engine: Enhance SSD endurance and data reliability.
  • Global Wear-leveling Technology: Ensure having lower erase counts to extend SSD lifespan.
  • Flash Bad-block Management: Manage cell blocks that fail over time.
  • End-to-End Data Protection: Protect sensitive data with comprehensive security.
  • Others: ATA Secure Erase, TRIM, Page Mapping, Hyper Cache Technology, and Smart Read Refresh.

 

With its exceptional performance and reliability, SM170-25 is an ideal storage or cache solution for a variety of application, including server and networking.

规格表
  • 型号
    SM170-25
  • 介面
    SATA III
  • 接口
    (7+15) pin male
  • 板型
    2.5"
  • NAND 颗粒
    2D MLC
  • 容量
    32GB~512GB
  • 外置DRAM
    No
  • 读取速度(MB/sec)
    Up to 550
  • 写入速度(MB/sec)
    Up to 480
  • ECC纠错功能
    Low-Density Parity-Check (LDPC) Code
  • IOPS (4K 随机写入)
    70K
  • 标准作业温度(°C)
    0 ~ 70
  • 最高作业温度(°C)
    -40 ~ 85
  • 放置温度(°C)
    -55 ~ 100
  • 冲击耐力
    Operation: Acceleration, 50(G)/11(ms)/half sine
    (Compliant with MIL-STD-202G)
    Non-operation: Acceleration,1,500(G)/0.5(ms)/half sine
    (Compliant with MIL-STD-883K)
  • 震动耐力
    Operation:7.69 Grms, 20~2000 Hz/random
    (Compliant with MIL-STD-810G)
    Non-operation:4.02 Grms, 15~2000 Hz/random
    (Compliant with MIL-STD-810G)
  • 电压
    5V ± 5%
  • 用电量
    Active mode (Max.): 540 mA / Idle mode: 70 mA
  • 尺寸 (L x W x H )
    100.00 x 69.85 x 7.00, unit: mm
  • MTBF (小时)
    >2,000,000

如有进一步需求 欢迎与我们联系

若您有任何需要我们服务的地方,欢迎来信询问,我们收到您的来信后将尽速回覆!