SV250-M242 CoreSnapshot 2 Client Edition
SV250-M242 CoreSnapshot 2 Client Edition
- Low-Density Parity-Check (LDPC) Code
 - Global Wear Leveling
 - Flash bad-block management
 - Flash Translation Layer: Page Mapping
 - S.M.A.R.T.
 - DataDefender™
 - Device Sleep
 - ATA Secure Erase
 - TRIM
 - Hyper Cache Technology
 - Over-provisioning
 - SMART Read Refresh™
 
Introduction
SV250-M242 CoreSnapshot 2 Client Edition is built with a powerful SATA controller that supports on-the-module ECC as well as efficient wear leveling scheme and implemented with LDPC (Low Density Parity Check) ECC engine to extend SSD endurance and increase data reliability. Furthermore, SV250-M242 CoreSnapshot 2 Client Edition is equipped with a built-in thermal sensor to monitor the temperature of the SSD via S.M.A.R.T commands to prevent overheating. For highly-intensive applications, End-to-End Data Protection ensures that data integrity can be assured at multiple points in the path to enable reliable delivery of data transfers. Security-wise, Advanced Encryption Standard (AES) ensures data security and provides users with peace of mind knowing their data is safeguarded at all times.
On top of that, SV250-M242 CoreSnapshot 2 Client Edition features CoreSnapshot 2, a system disaster’s savior, to offer an instant whole disk backup and recovery mechanism for SSDs to solve unexpected data loss or OS crush immediately, reducing downtime and maximizing output.
- 
                                                型号SV250-M242 CoreSnapshot 2
 - 
                                                介面SATA 3.2 (6Gb/s)
 - 
                                                接口75-pin SATA-based M.2 module pinout
3-pin CoreSnapshot 2 connector - 
                                                板型M.2 2242
 - 
                                                NAND 颗粒3D TLC
 - 
                                                容量60GB~480GB
 - 
                                                外置DRAMNo
 - 
                                                读取速度(MB/sec)Up to 550
 - 
                                                写入速度(MB/sec)Up to 485
 - 
                                                ECC纠错功能Low-Density Parity-Check (LDPC) Code
 - 
                                                IOPS (4K 随机写入)65K
 - 
                                                标准作业温度(°C)0 ~ + 70
 - 
                                                最高作业温度(°C)-40 ~ +85
 - 
                                                放置温度(°C)-55 ~ +100
 - 
                                                温度感测功能Yes
 - 
                                                冲击耐力Operating:Acceleration, 50(G)/11(ms)/half sine
(compliant with MIL-STD-202G)
Non-operating:Acceleration, 1500(G)/0.5(ms)/half sine
(compliant with MIL-STD-883K) - 
                                                震动耐力Operation:7.69(Grms), 20~2000(Hz)/random
(compliant with MIL-STD-810G)
Non-operation:4.02(Grms), 15~2000(Hz)/random
(compliant with MIL-STD-810G) - 
                                                电压3.3V ± 5%
 - 
                                                用电量Active mode: 400 mA / Idle mode:65 mA
 - 
                                                尺寸 (L x W x H )22.00 x 42.00 x 4.43 (mm)
 - 
                                                MTBF (小时)>3,000,000