mSATA (MO-300)

SS170-300

mSATA (MO-300)

SS170-300

  • Low-Density Parity-Check (LDPC) Code
  • Global Wear-leveling
  • Flash Bad Block Management
  • Power Failure Management
  • ATA Secure Erase
  • Flash Translation Layer: Page Mapping
  • TRIM
  • S.M.A.R.T.
  • SSDWidget

Speed and Trust. Both You Can Find on SS170-300

 

Looking for a storage solution with both outstanding performance and high reliability? Apacer’s SS170-300 is what you can trust, designed to meet the growing demands of today’s server and networking application. Built with full compliance to SATA 6 Gb/s interface, delivering exceptional read and write speeds that keep your systems running at better efficiency. These features make it the perfect choice for demanding industrial or server operations with heavy workloads.

 

With Apacer’s storage solutions, you’ll experience:

  • Superior Power Efficiency: 3D NAND Technology offers better performance than 2D NAND.
  • Outstanding Data Transmission: on-the-module ECC provides extraordinary data transfer performance.
  • Ensure Reliability: S.M.A.R.T.: Provide proactive SSD health management.

 

Equipped with advanced technologies support:

  • LDPC (Low Density Parity Check) ECC Engine: Enhance SSD endurance and data reliability.
  • Global Wear-leveling Technology: Ensure having lower erase counts to extend SSD lifespan.
  • Flash Bad-block Management: Manage cell blocks that fail over time.
  • End-to-End Data Protection: Protect sensitive data with comprehensive security.
  • Others: ATA Secure Erase, TRIM, and Page Mapping.

 

With its exceptional performance and reliability, SS170-300 is an ideal storage or cache solution for a variety of application, including server and networking.

 

사양
  • 모델
    SS170-300
  • 인터페이스
    SATA III
  • 커넥터
    52-pin mSATA connector
  • 폼 팩터
    JEDEC MO-300
  • NAND 플래시 유형
    2D SLC
  • 용량
    8GB~64GB
  • 외장 DRAM
    No
  • 순차 읽기 성능(MB/초)
    Up to 510
  • 순차적 쓰기 성능(MB/초)
    Up to 310
  • ECC 엔진
    Low-Density Parity-Check (LDPC) Code
  • IOPS(5K 랜덤 쓰기)
    65K
  • 표준 작동 온도(°C )
    0 ~ 70
  • 확장된 작동 온도(°C)
    -40 ~ 85
  • 보관 온도(°C)
    -55 ~ 100
  • 충격
    Operation: Acceleration, 50(G)/11(ms)/half sine
    (Compliant with MIL-STD-202G)
    Non-operation: Acceleration,1,500(G)/0.5(ms)/half sine
    (Compliant with MIL-STD-883K)
  • 진동
    Operation:7.69 Grms, 20~2000 Hz/random
    (Compliant with MIL-STD-810G)
    Non-operation:4.02 Grms, 15~2000 Hz/random
    (Compliant with MIL-STD-810G)
  • 작동 전압
    3.3V ± 5%
  • 전력 소비
    Active Mode: 690 mA / Idle Mode: 110 mA
  • 치수(L x W x H)
    50.80 x 29.85 x 4.85(max.), unit: mm
  • MTBF(시간)
    >3,000,000

문의하기

추가 문의 사항이 있으시면 문의 부탁드립니다.