2.5" SSD 드라이브

SS170-25

2.5" SSD 드라이브

SS170-25

  • Low-Density Parity-Check (LDPC) Code
  • Global Wear-leveling
  • Flash Bad Block Management
  • Power Failure Management
  • ATA Secure Erase
  • Flash Translation Layer: Page Mapping
  • TRIM
  • S.M.A.R.T.
  • SSDWidget

Apacer SS170-25 is a well-balanced solid-state disk (SSD) with a standard form factor and excellent performance. Designed with a SATA 6 Gb/s interface, SS170-25 fully complies with the latest SATA Revision 3.2 specifications, delivering exceptional read/write speeds. This makes it an ideal companion for demanding industrial or server operations.

 

SS170-25 is built with a powerful SATA controller that supports on-the-module ECC for error correction as well as efficient wear leveling scheme for extended lifespan. Additionally, SS170-25 is equipped with a built-in thermal sensor (available on the wide-temp model only) to monitor the temperature of the SSD via S.M.A.R.T commands to prevent overheating. Operating under 6 Gb/s interface, SS170-25 is provided with Apacer latest S.M.A.R.T. that is primarily oriented for the latest SATA interface SSD, for drive lifetime monitoring and analysis.

 

In terms of reliability, SS170-25 features End-to-End Data Protection to ensure data integrity across the entire transfer path, delivering reliable and secure data transmission. It also incorporates a range of advanced technologies, including bad block management, power failure management, ATA secure erase, page mapping, TRIM support, and power-saving modes.

With exceptional performance and enhanced reliability, SS170-25 is the ideal storage or cache solution for a variety of applications, including industrial, imaging, computing, and enterprise markets.

사양
  • 모델
    SS170-25
  • 인터페이스
    SATA III
  • 커넥터
    (7+15) pin male
  • 폼 팩터
    2.5"
  • NAND 플래시 유형
    2D SLC
  • 용량
    8GB~128GB
  • 외장 DRAM
    No
  • 순차 읽기 성능(MB/초)
    Up to 510
  • 순차적 쓰기 성능(MB/초)
    Up to 420
  • ECC 엔진
    Low-Density Parity-Check (LDPC) Code
  • IOPS(5K 랜덤 쓰기)
    70K
  • 표준 작동 온도(°C )
    0 ~ 70
  • 확장된 작동 온도(°C)
    -40 ~ 85
  • 보관 온도(°C)
    -55 ~ 100
  • 충격
    Operation: Acceleration, 50(G)/11(ms)/half sine
    (Compliant with MIL-STD-202G)
    Non-operation: Acceleration,1,500(G)/0.5(ms)/half sine
    (Compliant with MIL-STD-883K)
  • 진동
    Operation:7.69 Grms, 20~2000 Hz/random
    (Compliant with MIL-STD-810G)
    Non-operation:4.02 Grms, 15~2000 Hz/random
    (Compliant with MIL-STD-810G)
  • 작동 전압
    5V ± 5%
  • 전력 소비
    Active Mode: 480 mA / Idle Mode: 70mA
  • 치수(L x W x H)
    100.00 x 69.85 x 7.00, unit: mm
  • MTBF(시간)
    >3,000,000

문의하기

추가 문의 사항이 있으시면 문의 부탁드립니다.