SS170-18
SS170-18
- Low-Density Parity-Check (LDPC) Code
- Global Wear-leveling
- Flash Bad Block Management
- Flash Translation Layer: Page Mapping
- S.M.A.R.T.
- TRIM
- ATA Secure Erase
- Power Failure Management
- ATA Secure Erase
- SSDWidget
Apacer’s SS170-18 is a well-balanced solid-state drive (SSD) with a standard form factor and impressive performance. Designed with a SATA 6 Gb/s interface, SS170-18 complies fully with the latest SATA Revision 3.2 specifications and delivers exceptional read/write speeds, making it the ideal companion for demanding industrial or server operations.
SS170-18 is built with a powerful SATA controller that supports on-the-module ECC for error correction as well as efficient wear leveling scheme for extended lifespan. Additionally, SS170-18 is equipped with a built-in thermal sensor (available on the wide-temp model only) to monitor the temperature of the SSD via S.M.A.R.T commands to prevent overheating. Operating under 6 Gb/s interface, SS170-18 is provided with Apacer latest S.M.A.R.T. that is primarily oriented for the latest SATA interface SSD, for drive lifetime monitoring and analysis.
In terms of reliability, SS170-18 features End-to-End Data Protection to ensure data integrity across the entire transfer path, delivering reliable and secure data transmission. It also incorporates a range of advanced technologies, including bad block management, power failure management, ATA secure erase, page mapping, TRIM support, and power-saving modes.
With exceptional performance and enhanced reliability, SS170-18 is the ideal storage or cache solution for a variety of applications ranging from industrial, imaging, computing to enterprise markets.
-
모델SS170-18
-
인터페이스SATA III
-
커넥터(7+15) pin male
-
폼 팩터1.8"
-
NAND 플래시 유형2D SLC
-
용량64GB~128GB
-
외장 DRAMNo
-
순차 읽기 성능(MB/초)Up to 510
-
순차적 쓰기 성능(MB/초)Up to 420
-
ECC 엔진Low-Density Parity-Check (LDPC) Code
-
IOPS(5K 랜덤 쓰기)70K
-
확장된 작동 온도(°C)-40 ~ 85
-
보관 온도(°C)-55 ~ 100
-
열 센서Yes
-
진동Operation: Acceleration, 50(G)/11(ms)/half sine
(Compliant with MIL-STD-202G)
Non-operation: Acceleration,1,500(G)/0.5(ms)/half sine
(Compliant with MIL-STD-883K) -
작동 전압3.3V ± 5% / 5V ± 5%
-
전력 소비3.3V: Active Mode (Max.): 680 mA; Idle Mode: 100 mA
5V: Active Mode (Max.): 450 mA; Idle mode: 70 mA -
치수(L x W x H)78.50 x 54.00 x 5.00, unit: mm
-
MTBF(시간)>3,000,000