SSD Module

SDM5A 7P/180D LP2

SSD Module

SDM5A 7P/180D LP2

  • 7-pin SATA connector
  • Unique Hook Design
  • Power Cable-less Solution
  • Perfect Solution for 1U System
  • TRIM Command Support
  • Write Protect by hardware switch
  • Built-in ATA Secure Erase and S.M.A.R.T. Functions
  • Global Wear-Leveling and Block Management

Introduction

Apacer’s SDM5 (SATA Disk Module 5) 7P/90D LP2 is Apacer’s next generation disk-on-module (DOM) series that offers elevated speed boost and higher error correction capabilities. Built with SATA 6.0 Gb/s interface, SDM5 delivers high performance and wide compatibility.

With its SATA interface compliance and compact size, this high-speed disk module defines an ideal balance of performance, capacities, reliability and cost. SDM5 is suitable in industrial applications and light operating systems for specific operations. The architectural nature of SATA disk module provides higher resistance to external environmental influences and better flexibility for motherboard space.

사양
  • 모델
    SDM5A 7P/180D LP2
  • 인터페이스
    SATA 3.2 (6Gb/s)
  • 커넥터
    7-pin male
  • 폼 팩터
    SSD Module
  • NAND 플래시 유형
    SLC
  • 용량
    8GB~32GB
  • 외장 DRAM
    No
  • 순차 읽기 성능(MB/초)
    Up to 435
  • 순차적 쓰기 성능(MB/초)
    Up to 215
  • ECC 엔진
    Built-in 40-bit per 1K bytes BCH ECC
  • 표준 작동 온도(°C )
    0 ~ + 70
  • 확장된 작동 온도(°C)
    -40 ~ + 85
  • 보관 온도(°C)
    -40 ~ + 100
  • 하우징
    No
  • H/W 쓰기 보호
    Optional
  • 나사 구멍
    Yes
  • 케이블 없는 솔루션
    Optional (7+2 cable-less, Pin 7 Power cable-less)
  • 충격
    Operation: 50G, 11ms
    Non-operation: 1500G, 0.5ms
  • 진동
    Operation: 7.69 Grms, 20~2000 Hz/random (compliant with MIL-STD-810G)
    Non-operation: 4.02 Grms, 15 ~ 2000 Hz/sine (compliant with MIL-STD-810G)
  • 작동 전압
    5.0 V ± 5%
  • 전력 소비
    Active mode: 260 mA; Idle mode: 60 mA
  • 치수(L x W x H)
    33.00 x 29.30 x 8.85 mm
  • MTBF(시간)
    >2,000,000

문의하기

추가 문의 사항이 있으시면 문의 부탁드립니다.